Extreme Networks ExtremeWireless WS-AP3915i-FCC - Page 14

2 Open the movable sliding part of the T-bar to give the stationary and slider T-bar more space.
Figure 5: Installing the T-bar adaptor
3 Hook the stationary end of the T-bar bracket onto the T-bar.
4 Tilt the T-bar up slightly in such a way that you are holding the stationary and movable sides of the
bracket. 4 Squeeze the bracket parts together until you hear the T-bar locking tab click into place.
Installation Process
ExtremeWireless™ AP3915i FCC/ROW Installation Guide 14