Extreme Networks Summit WM3000 Series - Page 223

Summit WM3000 Series Controller System Reference Guide 223
Creating a Bridge Instance
To create a VLAN instance and associate it with a bridge as a numerical identifier:
1 Select Network > Multiple Spanning Tree from the main menu tree.
2 Select the Bridge Instance tab.
3 Click the Add button.
4 Enter a value between 1 and 15 as the Instance ID.
5 Click OK to save and commit the changes.
6 The Bridge Instance tab with now display the new instance ID.
7 Click Cancel to disregard the new Bridge Instance ID.
Associating VLANs to a Bridge Instance
1 Select Network > Multiple Spanning Tree from the main menu tree.
2 Select the Bridge Instance tab.
3 Select an ID from the table within the Bridge Instance tab and click on the Add VLANs button.
4 Enter a VLAN ID between 1 to 4094 in the VLAN ID field. This VLAN ID is associated with the
Instance index. You can add multiple VLANs to an instance.
5 Click OK to save and commit the new configuration.
6 Click Cancel to disregard the changes.