Controller Information
Summit WM3000 Series Controller System Reference Guide54
To view configuration details for the uplink and downlink ports:
1 Select Controller > Port from the main menu tree.
2 Select the Configuration tab to display the following read-only information:
3 Select a port and click the Edit button to modify the port configuration. For additional information,
see “Editing the Port Configuration” on page 55.
Name
Displays the current port name. The port names available vary by
controller.
Summit WM3600: ge1, ge2, ge3, ge4, ge5, ge6, ge7, ge8, me1, up1
Summit WM3700: ge1, ge2, ge3, ge4, me1
MAC Address
Displays the port’s MAC Address. This value is read-only, set at the
factory and cannot be modified.
Admin Status
Displays whether the port is currently Up or Down.
Speed
Displays the current speed of the data transmitted and received over the
port.
Duplex
Displays the port as either half or full duplex.
Medium
Displays whether the connection medium is cooper or not.
To Next Page
Loading...