STORAGE CONTROL OF LITHIUM BATTERY
This function is for charging/discharging batteries which are not used at once. This program is
designed for charging or discharging of batteries of specific original state. They are classified by
types: 3.75V Lilo, 3.85V LiPo and 3.3V LiFe. The program will begin to discharge if the original
state of the battery exceeds the voltage level of storage.
Storage control of lithium battery
20
At this screen, you can set up the current and voltage of the battery
pack. Charging and discharging will make the batteries come to the
voltage level of "storage" state.
This screen shows the real-time status charging. Press BATT
TYPE/STOP key once to stop the charge process.
Number
of
cells
DEC
-
Batt type
Stop
Elapsed
time
INC
+
Charge
or discharge
current
Supplied
capacity
DEC
Start
Enter
-
INC
+
Current
voltage
battery
Charging lithium battery in the storage mode
‘>3 second’
To Next Page
Loading...