Extremis kosmos - Kosmos Shade Assembly; Utilities for Shade Assembly

+/- 45 min.
sitting lounging
e two free openings are used to tilt the parasol
slightly backwards in order to level the parasol cloth,
by means of adjusting screws.
To do this, rst unscrew the top bolts again a little looser
until the ideal angle is reached, and then turn the set
screws clockwise until against the vertical tube.Use a #4
Allen wrench to do this.
5. From the inside of the furniture, insert 4 bolts M8x70
through the holes provided (two at the bottom and two
at the top). at the bottom and two at the top).
On the outside, then slide the plastic spacer Erover and
then the parasol pole. Tighten rmly.
Follow the rst 4 steps from pages 4-5.
ASSEMBLY WITH KOSMOS SHADE
UTILITIES
2 people
screwdriver
8