Extron DTP T UWP 4K D Series • Reference Information 21
Using PCS with the DTP T UWP 4K D Transmitters
To connect to the DTP T UWP 4K D transmitter, Connect a male USB Mini-B cable to the
front panel USB port (see figure 4, D on page 6) and to the PC with the PCS software
installed.
Once the PCS software opens, the Device Discovery screen appears.
To start the DTP T UWP 4K D configuration module, double-click on the transmitter in the
Device Discovery list, or click on the transmitter in the list, then click the Connect
button.
Drop-down device menu
The drop-down device menu provides access to the following options:
To Next Page
Loading...