Extron DTP T UWP 4K D Series • Reference Information 22
• Disconnect — Disconnects the currently connected device and returns the software to
the Device Discovery screen
• Hardware Settings — Opens the Hardware Settings window
• Reset Device... — Opens the Reset Device window to reset the device settings
• Update Firmware — Opens the Update Firmware window for updating the device
firmware
• About This Module — Opens the About This Module dialog box with information
about the PCS software module
AV Controls
Use the AV Controls panel to:
• Select Input
• Mute Audio
• Mute Video
• Mute Audio and Video
• Mute Sync
Input/Output Config
• HDCP Authorized — The HDCP Authorized setting allows a user to turn off HDCP
communication on the input. This setting is useful for devices that will always encrypt
their output if the downstream sink is capable of HDCP. By not allowing HDCP signals
on an input, most content from these sources can be passed as a non-encrypted signal
to analog and digital video outputs.
To Next Page
Loading...