Intertek Safety Mark: Compliance of this product with applicable
standards is certified by Intertek, an independent testing agency.
Fiber optic interface to OC camera head
complies with FDA and IEC laser safety
standards. Refer to Chapter 6 of the User
Manual.
FCC Statement:
NOTE: This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment can radiate radio frequency
energy and may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at the users’ expense.
CISPR WARNING: This is a Class A product. In domestic environments this product
may cause radio interference in which case the user may be required to take adequate
measures.
WARNING: Changes or modifications not expressly approved by SR Research Ltd. could
void the user’s warranty and authority to operate the equipment. This includes
modification of cables, removal of ferrite chokes on cables, or opening cameras or
connectors.
WARNING: Opening or modifying cameras and connector will void the warranty and
may affect safety compliance of the system. No user-serviceable parts inside - contact
SR Research for all repairs.
To Next Page
Loading...
