Need help?Do you have a question about the Eyemax TVST TR SERIES and is the answer not in the manual?
Details the product's capabilities including live surveillance, compression, storage, backup, recording, security, and network functions.
Guides users on how to properly power on and power off the HD TVI Hybrid DVR unit.
Sets up recording options like enable/disable record, audio, resolution, quality, and bitrate.
Explains how to set up a recording schedule for specific times and days of the week.
Configures the DVR to record automatically when motion is detected by a camera.
Sets up recording to trigger based on external sensor alarms, linking sensor events to recording.
Guides on backing up recorded data to external storage devices like USB drives.
Configures the DVR to trigger alarms based on input from external sensors.
Sets up alarms to trigger when motion is detected within the camera's view.
Configures serial port settings (address, baud rate, protocol) for PTZ devices.
Sets up IP address, subnet mask, gateway, DNS, and HTTP/server ports for network connectivity.
Configures device name, ID, video format, language, logout timers, and startup wizard.
Allows adding, deleting, modifying users, and assigning operation rights and authority.
Manages hard disk status, formatting, and checks disk health and properties.
Guides on how to update the device firmware using a USB storage device.
Enables remote viewing through Internet Explorer using NAT settings.
Details how to access the DVR remotely over a Local Area Network or Wide Area Network.
General| Video Compression | H.264 |
|---|---|
| Motion Detection | Yes |
| Operating System | Embedded Linux |
| Audio Output | 1 channel |
| Mobile Viewing | Yes |
| Network | Ethernet |
| Video Input | 4/8/16 channels |
To Next Page
