B
Brian ThomasJul 27, 2025
What to do if my EZ TANKLESS Water Heater fails to light after 10 cycles?
- TTiffany BlackJul 28, 2025
If your EZ TANKLESS Water Heater fails to light or stay lit after 10 cycles, turn on the main valve.
To Next PageTo Next PageWhat to do if my EZ TANKLESS Water Heater fails to light after 10 cycles?
If your EZ TANKLESS Water Heater fails to light or stay lit after 10 cycles, turn on the main valve.
How to fix no ignition after opening water valve in EZ TANKLESS Water Heater?
To resolve the issue of no ignition after opening the water valve on your EZ TANKLESS Water Heater, properly connect the water inlet pipe and water outlet pipe.
What to do if my EZ TANKLESS Water Heater has a power shortage?
If your EZ TANKLESS Water Heater experiences a power shortage, replace the batteries.
What to do if the EZ TANKLESS Water Heater water inlet is clogged?
If the water inlet of your EZ TANKLESS Water Heater is clogged, check and clean the filter.
General| Brand | EZ TANKLESS |
|---|---|
| Model | CampChamp |
| Category | Water Heater |
| Type | Tankless |
| Fuel Type | Propane |
| Dimensions | 11.5 x 4.5 x 14.5 inches |
| Weight | 11.4 Lbs |
| Power Source | 2 D-cell batteries |
Automatic activation when hot water tap is turned on; automatic shutdown when turned off.
Ultra-thin appearance, energy-saving combustion technology, and low water pressure ignition.
Includes flame out, overheat, anti-blockage, and dry burning protection.
Key requirements for safe and proper placement of the water heater, including location and clearances.
Detailed steps for mounting the heater and connecting the gas and water lines.
Instructions for connecting the gas and water inlet/outlet pipes to the unit.
Guidance on attaching the gas regulator and hose to the cylinder and heater.
Instructions for connecting the garden hose to the water inlet using the provided fitting.
Steps for connecting the shower hose and head to the hot water outlet.
Procedure for installing the shower base to hold the shower head.
Guidance on inserting batteries into the unit, ensuring correct polarity.
Checks and steps required before initiating the ignition sequence for the water heater.
How to adjust water flow and gas supply to achieve the desired hot water temperature.
Instructions for cleaning the exterior surfaces of the water heater with a damp cloth.
Procedure for cleaning the water filter by reversing the water flow.
