What to do if ezee quando Bicycle power supply is faulty or controller fails?
If you suspect a faulty power supply or controller failure on your ezee Bicycle, start by inspecting the battery and power connections for any signs of damage. If the problem persists, consider replacing the controller.
How to fix controller failure on ezee quando Bicycle?
To address a controller failure on your ezee Bicycle, replace the controller.
What to do if my ezee quando doesn't show 3 phase wires?
If your ezee Bicycle does not show the 3 phase wires when the main power is turned on, inspect the cable and connector for any dislocation or damage. Also, ensure that the throttle is turned to demand power.
How to fix faulty thermostat on ezee quando?
To fix a faulty thermostat on your ezee Bicycle, replace the controller.
Explains EU EPAC rules for motor power, speed, and pedal assistance.
Outlines US rules for assisted speed, motor power, and throttle use.
Connecting the charger to the battery and power outlet.
Crucial advice on charger plug handling and action sequence.
Safety warnings against wet charging and leaving battery discharged.
Practice riding, EPAC/Pedelec, and E-Bike modes.
Explains the controller's red LED and its diagnostic blinking patterns.
Addresses motor, brake, throttle, and voltage issues with solutions.
Solutions for controller failures and stalled motor conditions.
Troubleshooting power supply, lights, moisture, and recording serial numbers.
General| Brake Type | Mechanical disc brakes |
|---|---|
| Battery | 36V 10Ah lithium-ion |
| Charging Time | 4-6 hours |
| Foldable | Yes |
| Gears | 7-speed |
| Frame Material | Aluminum |
| Motor | 250W rear hub motor |
| Display | LCD Display |
To Next Page
