Need help?Do you have a question about the ezee Sprint and is the answer not in the manual?
Details conditions under which the manufacturer's guarantee is valid for material and construction defects.
Lists circumstances and conditions that void the manufacturer's guarantee, such as misuse or accident.
Outlines what is covered by the guarantee, including replacement of defective parts, but excluding labor and transportation costs.
Instructions for carefully removing the bicycle from its packaging and preparing it for assembly.
Guide for securely fitting the front wheel into the fork dropouts and tightening the nuts.
Instructions for inserting and fastening the seat post, with a warning about maximum extension.
Details on attaching the front mudguard supports to the front fork for secure fitment.
Emphasizes the importance of correct brake adjustment for safety and proper wheel spin.
Guidance on installing any optional purchased accessories according to manufacturer instructions.
Step-by-step instructions for inserting and securing the battery into its holder, including key operation.
Recommendations for inflating tyres to the correct pressure for optimal comfort, safety, and efficiency.
Advice on appropriate usage for the eZeebike, including attire, speed, and weather awareness.
Recommends a quick check of mechanical and electronic features before each ride for safety.
Visual inspection of the frame and fork for damage, advising against riding if bent or fractured.
Guidance on checking wheels for spokes and trueness, and ensuring tyres are correctly inflated.
Instructions to ensure the handlebars and stem are tightened correctly for proper steering control.
How to check that both front and rear brakes function correctly and cables are unobstructed.
Advice on ensuring the chain runs smoothly, is lubricated, clean, and has proper tension.
Describes the boot-up sequence of the display when the electric bike is switched on.
Explains how the power level is indicated and the requirement for at least one blue LED for power.
Instructions on how to enter and navigate the setup menu using the buttons.
Details the different operational modes available, including Pedelec, EBike, and torque sensor options.
Recommendations for practicing handling the bike in a safe area before riding on roads.
Explains how the pedal assist system engages based on crank rotation and console settings.
Describes how the motor operates via the throttle and provides range estimates for E-Bike mode.
How the battery level gauge indicates remaining charge and the impact of deep discharge.
States that front and rear LED lights are powered by the main battery.
How to turn the key to the 'OFF' position to shut off the system and lock the battery.
Instructions on how to deploy and use the bike's central support stand.
Information regarding the use of the luggage rack and its maximum load limit.
Routine safety checks and visual inspection recommended before each ride.
Cleaning the bike, chain, and gears, and oiling them at specific mileage intervals.
Checks for brake looseness, steering tightness, and recalibrating brakes as needed.
Inspecting spokes for tension and cables for damage, recommending dealer checks for issues.
Recommendation to seek specialist help for tyre puncture repairs.
Steps involved in changing a tyre on the hub motor wheel, including unplugging wires.
Recommendation for a thorough inspection by an eZee dealer after 5,000 kms.
Instructions to keep the vendor's receipt with the date of purchase clearly marked.
Guidance on recording serial numbers for motor, frame, controller, charger, and battery for reference.
A section for recording dealer contact information or notes.
To Next Page
General
