eZLO Plus - Inclusion and Exclusion Basics; Z-Wave Device Compatibility

Inclusion and Exclusio
Your Ezlo Plus Controller can work with all Z-Wave devices,
such as sensors, alarms, door locks, thermostats, etc. Over
a thousand Z-Wave devices are available from many
brands. (Z-Wave is a wireless communications system;
check the package or specs to see if a device uses
Z-Wave.
The Ezlo Plus can be operated in any Z-Wave network with
other Z-Wave certied devices from other manufacturers.
All mains operated nodes within the network will act as
repeaters regardless of vendor to increase reliability of the
networ
Before your Ezlo Plus can control a device, it must be
included into the Vera system.
Vera are available for select
devices that pass stringent Vera Labs testing for
compatibility and quality. The Custom Device Wizards
make Inclusion/Exclusion easiest, with specic details for
each device. A list of these devices is available and
updated at hps://ezlo.com/device-compatibility
For all other Z-Wave devices, a is
used for Inclusion/ Exclusion. A Generic Device Wizard is
available for each device category (thermostats, sensors,
alarms, etc.)
Custom Device Wizards
Generic Device Wizard