Ezviz C1HC - Product Setup; Power-on Procedure; EZVIZ App Camera Setup

4
Setup
Step 1 Power-on
Plug the power cable into the camera and to the power adapter and then into a
power outlet, as shown in the figure below.
Power Outlet
Power Cable
Step 2 Camera Setup
1. Create a user account
- Connect your mobile phone to Wi-Fi.
- Download and install the EZVIZ app by searching “EZVIZ” in App Store or
Google Play
TM
.
- Launch the app and register for an EZVIZ user account following the start-
up wizard.
2. Add a camera to EZVIZ
- Log in the EZVIZ app.
- From the EZVIZ app Home screen, tap “+” on the upper-right hand corner to
go to the scan QR code interface.