Do you have a question about the Ezviz S5 and is the answer not in the manual?
Video resolutions | 1280 x 720, 1280 x 960, 1920 x 1080, 3840 x 2160 pixels |
---|---|
Maximum frame rate | 240 fps |
Supported video modes | 720p, 960p, 1080p |
Maximum video resolution | 3840 x 2160 pixels |
Analog signal format system | NTSC, PAL |
Flip-out screen | No |
Built-in display | Yes |
Display resolution | 320 x 240 pixels |
Sensor type | CMOS |
Total megapixels | 16 MP |
Optical sensor size | 1/2.33 \ |
Lens type | Ultra wide-angle |
Fixed aperture | 2.8 mm |
Fixed focal length | 3 mm |
Field of view (FOV) angle | 158 ° |
Product color | Gray |
Waterproof up to | 40 m |
Protection features | Waterproof |
Frequency band | 2.4 / 5 GHz |
Wi-Fi standards | Wi-Fi 5 (802.11ac) |
Bluetooth version | 4.0 |
Battery capacity | 1160 mAh |
Battery life (max) | 1.5 h |
Light metering | Centre-weighted, Spot |
Storage media | Internal memory + Memory card |
Compatible memory cards | MicroSD (TransFlash) |
Maximum memory card size | 128 GB |
USB connector type | Micro-USB |
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 1 |
Operating temperature (T-T) | -20 - 45 °C |
Mobile operating systems supported | Android, iOS |
Depth | 20.9 mm |
---|---|
Width | 58 mm |
Height | 45 mm |
Weight | 99.7 g |
Details of buttons, ports, indicators, and other camera parts.
Explanation of buzzer alerts and the standard bracket interface.
Remove the camera from its waterproof housing for initial setup.
Insert microSD card for video and picture storage.
Charge the camera fully before first use.
Specifies required iOS and Android versions for the app.
Download and install the app from App Store or Google Play.
Enable the camera's Wi-Fi for app connectivity.
Connect your phone to the camera's Wi-Fi network.
Use the app to set parameters, record, and share.
Record video continuously.
Capture a single photo.
Capture multiple photos in short intervals.
Capture photos at predefined intervals.
Initiate video recording using the Shutter button or app.
End video recording and save the clip.
Details on resolution and frame rate options for video recording.
Describes Normal and Loop modes for video recording.
Take a single photograph using the Shutter button or app.
Options for selecting photo resolution and its impact.
Take rapid photos using the Shutter button or app.
Details on different burst rates (photos per second).
Take photos automatically at set intervals.
Options for interval timing in Time Lapse mode.
Settings for default recording mode and flipping the image.
Configure auto power-off time and video clip length.
Adjust light sensitivity, white balance, and metering.
Set video output standard (NTSC/PAL) and enable driving mode.
Enable Wi-Fi at power-on and control indicators/beeper.
Initialize/check storage, set Wi-Fi, and view device information.
Play back videos and photos on a display using HDMI.
View live video feed on a display using HDMI.