Need help?Do you have a question about the F5 i4000 Series and is the answer not in the manual?
Steps to perform a soft reboot of the unit using the touchscreen LCD.
Steps to perform a hard reset of the unit using the touchscreen LCD.
Steps to create custom alerts by editing the alert.conf file for LED behavior.
Steps to access the AOM Command Menu by connecting to the front panel serial console.
Overview of available options within the AOM Command Menu for platform management.
Procedure to create an AOM admin user account for network access to AOM.
Steps to assign IP address, netmask, and gateway for AOM management network access.
Procedure to access the AOM Command Menu remotely via SSH.
Guidelines for installing the i2000/i4000 Series platform into a 19-inch rack.
Steps for installing rail lock brackets to secure the platform to the rack.
Procedure for grounding the platform after rack installation.
Steps to connect the chassis ground lug to the ground terminal using provided components.
Steps to configure the management IP address using the touchscreen LCD.
Instructions for licensing the F5 software using the Configuration utility via the management IP address.
Information about supporting up to two AC or DC hot-swappable power supply units (PSUs).
Details on AC power supply units, including hot-swapping and redundancy.
Procedure for replacing a failed AC power supply unit in the system.
Information on supporting up to two DC power supplies and hot-swapping capabilities.
Procedure for replacing a failed DC power supply unit in the system.
Safety precautions and guidelines for installing the platform in a rack and ensuring proper ventilation.
Requirements for AC-powered installations, including circuit protection and earth connection.
Requirements for DC-powered installations, including circuit protection and grounding.
Detailed hardware specifications for the i2000 (i2600/i2800) Series platforms.
Detailed hardware specifications for the i4000 (i4600/i4800) Series platforms.
Power specifications for i2000 (i2600/i2800) Series platforms, including idle and typical draw.
Power specifications for i4000 (i4600/i4800) Series platforms, including idle and typical draw.
Procedures for removing sensitive data from F5 system components.
Procedure for removing sensitive data from HDD/SSD using disk erase operations.
Steps to remove customized IP address data from the AOM subsystem.
General| Brand | F5 |
|---|---|
| Model | i4000 Series |
| Category | Network Hardware |
| Language | English |
To Next Page
