Need help?Do you have a question about the F5 i2600 and is the answer not in the manual?
Step-by-step guide to perform a soft reboot using the LCD.
Step-by-step guide to perform a hard reset using the LCD.
Instructions for halting the system using the LCD menu.
Procedure for powering the unit off and on via the LCD.
Explains the meaning of the system status LED states.
Describes the alarm LED states and their severity levels.
Methods for managing network interfaces using tmsh or GUI.
Command to check the status of a single network interface.
Guide to configuring AOM network settings (IP, gateway).
Importance and location of platform grounding.
Detailed steps for connecting the chassis ground lug.
Guide to connecting network, console, and power cables.
Information on the platform's power supply units (PSUs).
Details on AC power supply units and their features.
Procedure for replacing a failed AC power supply unit.
Details on DC power supply units and requirements.
Procedure for replacing a failed DC power supply unit.
Safety and installation best practices for the environment.
Specifies rack clearances and spacing for installation.
Rules for installing single or dual power supplies.
Requirements for AC-powered installations.
Requirements for DC-powered installations.
Detailed hardware specs for the i2000/i2800 series.
Detailed hardware specs for the i4000/i4800 series.
Power consumption and heat generation for i2000 series.
Power consumption and heat generation for i4000 series.
Steps to erase sensitive data from storage drives.
General| Product Name | F5 i2600 |
|---|---|
| Category | Network Hardware |
| Product Type | Application Delivery Controller |
| Model | i2600 |
| Form Factor | 1U |
| Total Ports | 8 |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -40°C to 70°C |
| Product Series | BIG-IP |
| Port Type | 10/100/1000BASE-T |
| Power Supply | Dual |
| Management | Web-based, CLI |
| Humidity | 5% to 85% RH, non-condensing |
To Next Page
