Need help?Do you have a question about the FAAC J275 HA 2K20 and is the answer not in the manual?
The FAAC J275 HA 2K20 is an automatic hydraulic bollard designed for perimeter protection applications. This device is a robust and reliable solution for controlling vehicle access and enhancing security in various environments.
The J275 HA 2K20 is a hydraulic automatic bollard that can be raised and lowered to manage vehicle access. It operates using a hydraulic unit, which provides smooth and controlled movement. The bollard is designed to be installed in the ground, with its top surface flush with the surrounding pavement when retracted, allowing for seamless integration into urban landscapes. When activated, the bollard rises to a specified height, creating a physical barrier to prevent unauthorized vehicle entry.
The system supports both manual and automatic operation. In the event of a power failure or emergency, the bollard can be lowered manually using a release device, ensuring that access can still be managed. The automatic operation is controlled by a dedicated electronic board (JE275 board) that allows for various programming options, including setting the bollard's height and operating sequences. The system can be configured for single or multiple bollard installations, with master-slave configurations for larger systems.
Safety is a key aspect of the J275 HA 2K20. It incorporates several safety features, including a pressure switch to detect obstacles during movement, ensuring that the bollard stops if it encounters an obstruction. The system also includes provisions for emergency stop buttons and safety loops to enhance operational safety.
The J275 HA 2K20 operates on a power supply of 230V ~ 50 Hz, with a maximum power consumption of 575 W. It has a maximum thrust force of 2500 N and a pump delivery rate of 3 l/min. The lifting time is 4.5 seconds, and the lowering time is also 4.5 seconds.
The bollard is designed to operate in a wide range of temperatures, with an ambient operating temperature of -15 °C to +55 °C. For colder climates, an optional ambient operating temperature of -40 °C to +55 °C is available with a heater. The bollard has a weight of 160 kg and requires a pit weight of 80 kg.
Its dimensions include a cylinder height of 800 mm and a cylinder diameter of 275 mm. The hydraulic unit requires 1.5 liters of oil, with FAAC HP Oil recommended. The protection rating of the device is IP66, and the hydraulic control unit has an IP67 rating. The thrust capacitor (pre-wired) is 16 µF - 400V. The continuous use time (ROT) is 10 min at 23°C, and the load class (EN124) is C250 (25 t).
The bollard is certified according to several standards and performance levels, including PAS 68:2013 (V/7500 (N2)/48/90:1.7/0.0) and IWA 14-1:2013 (V/7200 (N2A)/48/90:1.9). These certifications indicate its high resistance to impact and its suitability for high-security applications.
The J275 HA 2K20 is designed for ease of use and integration. The control board allows for flexible programming of operating parameters, including the height of the bollard, the duration of its raised state, and various safety settings. The system can be configured for different operational modes, such as automatic, semi-automatic, or manual.
For multiple bollard installations, the system supports master-slave configurations, allowing a single master board to control up to three slave boards, each managing multiple bollards. This modularity enables scalable solutions for various site requirements.
The device includes visual indicators, such as a flashing LED light on the head, to signal its operational status. Optional accessories, such as an emergency lowering device (solenoid valve) and an obstacle detection pressure switch, further enhance its functionality and safety. The cover, which is flush with the ground when the bollard is retracted, can be customized to match the surrounding pavement.
The installation process involves preparing a pit, laying electrical conduits, and connecting the bollard to the control board. Detailed instructions are provided for wiring, connections, and programming, ensuring a straightforward setup.
Regular maintenance is crucial for the optimal performance and longevity of the J275 HA 2K20. The manual outlines a comprehensive maintenance schedule, including daily, monthly, and annual checks.
Key maintenance tasks include:
The manual provides detailed instructions for specific maintenance procedures, such as removing the hydraulic unit, topping up the oil level, and bleeding the system. It also covers troubleshooting common issues, offering suggestions for resolving problems like the bollard not raising or lowering correctly, or the flashing LED light not working.
All maintenance and repair work must be performed by qualified personnel to ensure safety and compliance with regulations. The use of original FAAC spare parts is recommended to maintain the warranty and ensure optimal performance.
General| Brand | FAAC |
|---|---|
| Model | J275 HA 2K20 |
| Category | Control Systems |
| Language | English |
To Next Page
