1. After installing the interface, the multimedia won’t turn on.
• Review the installation and check if the cables are connected according to the
images on page 3;
• Check if all the cables are well connected;
• Turn off the ignition, unplug the whip from the entertainment center, wait for 1
minute and replug the whip on the entertainment center again.
2. When I try to access AV1 or AV2, no sound will come out.
• Make sure the RCA “Audio Out” cable is connected to the multimedia audio in,
according to pictures on page 3;
• Check if you are selecting the AUX audio entry on the multimedia before
accessing the interface’s AV session.
Problem Solving
9
To Next Page
Loading...