Fab Fours M2250 User Manual

Installation Instructions
License plate bracket
Product Number: M2250, M2251, M2350
For application with the Vengeance bumper line
SAFETY
Your safety and the safety of others is very important.
 In order to help you make informed decisions about safety, we have provided installation
instructions and other information.
 These instructions alert you to potential hazards that could hurt you or others.
 Please do a job safety analysis (JSA) before each task to identify potential hazards for
your situation and remove/protect against them.
 You must use your own good judgment, and take your time.
Read and understand all safety precautions and instructions before installing this product.
THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION
AND USE RESTS WITH THE OWNER.
CARELESS INSTALLATION AND OPERATION CAN RESULT IN SERIOUS INJURY
OR EQUIPMENT DAMAGE.
Injury hazard
Failure to observe these instructions could lead to severe injury or death.
 Always remove jewelry and wear eye protection.
 Always use extreme caution when jacking up a vehicle for work. Set emergency
brake and use tire blocks. Locate and use the vehicle manufacturers designated
lifting points. Use jack stands.
 Always use appropriate and adequate care in lifting components into place.
 Always insure components will remain secure during installation and operation.
 Always wear safety glasses when installing this kit. A drilling operation will
cause flying metal chips. Flying chips can cause serious eye injury.
 Always use extreme caution when drilling on a vehicle. Thoroughly inspect the
area to be drilled (on both sides of material) prior to drilling, and relocate any
objects that may be damaged.
 Always use extreme caution when cutting and trimming during fitting.
 Always tighten all nuts and bolts securely per installation instructions.
 Always route electrical cables carefully. Avoid moving parts, components that
become hot and rough or sharp edges.
 Always insulate and protect all exposed wiring and electrical terminals.
 Always perform regular inspections and maintenance on mounts and
related hardware.

Fab Fours M2250 Specifications

General

Brand	Fab Fours
Model	M2250
Category	Automobile Accessories
Language	English

Summary

Safety Information

General Safety Guidelines

Emphasizes the importance of safety, reading instructions, performing job safety analysis, and using good judgment.

Injury Hazard Warnings

Details critical safety precautions to prevent severe injury or death during installation.

Product Overview

Congratulations and Features

Congratulates the user on their purchase and highlights the bracket's design, manufacturing, and quality.

Product Compatibility

Specifies that the product is designed for use only with Fab Fours Vengeance front bumpers.

Installation Procedure

Tools Required

Lists the necessary tools for installing the license plate bracket.

Mounting the Bracket

Provides step-by-step instructions for attaching the bracket to the bumper.

Maintenance and Care

Regular Checks

Outlines periodic checks for nuts, bolts, and hardware to ensure security and proper function.

Lubrication and Inspection

Recommends greasing the tire carrier pivot and checking latch hook tension.