Fix the cover plate with the 4 screws removed previously and
route the wiring box outside of the hood body through the notch
on the cover plate.
$WWDFKHDFKFKDUFRDO¿OWHUWRWKHEODFNJULGRQHDFKVLGHRIWKH
EORZHU3UHVVWKHFKDUFRDO¿OWHUWLJKWO\WRWKHEODFNJULGRQWKH
EORZHUVLGHDQGURWDWHWKH¿OWHUFORFNZLVHWRZDUGVWKHIURQW
of the hood) until it locks into place. Turn counterclockwise
(towards the back of the hood) to remove.
Required Activated Charcoal Filter Accessory -
sku # - FILTER1 (purchased separately)
To Next Page
Loading...
