Need help?Do you have a question about the Faber COCKTAIL and is the answer not in the manual?
General| Finish | Stainless Steel |
|---|---|
| Number of Motors | 1 |
| Material | Stainless steel |
| Control Type | Push Button |
| Lighting | LED |
Manufacturer liability for incorrect installation, safety distance, voltage check, earthing, flue connection, combustion fumes, aeration, power cable.
Domestic use, no naked flames, flame intensity, deep fat fryers, flambé, child supervision, hot parts warning.
Switching off, filter cleaning/replacement, hood cleaning.
Lists product components like hood body, sections, grille, flange, angle iron, filter cover.
Lists components for installation like fixing brackets, wall plugs, and various screws.
Lists documentation items, specifically the Instruction Manual.
Steps for drilling holes, marking points, inserting plugs, and fixing brackets for mounting the hood.
Instructions for mounting the decorative chimney brackets using screws and wall plugs.
Steps to open panels, remove filters, adjust screws, hook the body, level it, and fasten it.
Instructions for connecting the ducted version to the chimney using pipes and a reducer flange.
Steps to widen and hook the upper flue behind brackets and secure it with screws.
Steps to widen and hook the lower flue and fix it to the hood body.
Explanation of buttons (T1, T2, T3, T4, L) and their functions like motor speed, delay shutdown, intensive speed, and lighting.
How to open the panel, clean the inside and outside with damp cloth and neutral detergent.
Instructions for cleaning grease filters every 2 months, including removal, washing, drying, and reinstallation.
Information on replacing the activated charcoal filter every 4 months for recirculation models.
Steps for replacing the 20W halogen light, including cover removal, lamp extraction, and reinstallation.
To Next Page