EasyManua.ls Logo

Faber Hestia User Manual

Faber Hestia
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Hestia
Installation Guide
IRL U
K
40010610 - 0746
Question and Answer IconNeed help?

Do you have a question about the Faber Hestia and is the answer not in the manual?

Faber Hestia Specifications

General IconGeneral
ModelHestia
BrandFaber
MaterialSteel
ColorBlack
Fuel TypeNatural Gas or LPG
Fuel BedLogs
Gas TypeNatural Gas / LPG

Summary

1 Introduction

2 Safety and general information

Ventilation

Ensures the appliance is room-sealed and does not require purpose-provided ventilation.

General safety

Highlights legal requirements for competent person installation and general safety precautions.

3 Installation requirements

3.1 Builders opening and surround

Details for installing in non-combustible fireplaces or builders openings, including material and ventilation guidelines.

3.2 Flue requirements

Specifies requirements for the appliance's C11/C31 type flue system, including minimum height and routing.

3.3 Flue restrictor

Instructions for fitting the correct flue restrictor size in the combustion chamber during installation.

4 Instruction for Installation

4.1 Gas Connection

Guidelines for gas connection pipes, ensuring adequate size, soundness, and isolation for servicing.

4.2 Preparing the appliance

Steps for preparing the appliance, including removing packaging and adjusting its height using legs.

4.3 Placing the appliance

Procedures for placing the appliance, ensuring levelness, checking clearances, and fixing it to the back wall.

4.4 False Chimney Brest without surround

Steps for building a false chimney breast using Promatect, including specific dimensions.

4.5 False chimney with surround

Details on installing the heater in relation to a fireplace surround, including protrusion requirements.

4.6 Removal of the glass

Instructions for safely removing and re-fitting the appliance glass using suction pads.

4.7 Placing the log set

Guidance on correctly placing the log set within the appliance, referencing specific figures.

5 Commissioning (functional checks)

5.1 Pilot ignition check

Steps to ignite the pilot light and verify the pilot burner stays alight.

5.2 Check functional burner and pilot burner

Procedure for checking the appliance's burner and pilot burner operation, including pressure checks.

6 Handing over (final check and customer briefing)

7 Servicing

7.1 Routine anual servicing

Details on annual servicing tasks, including cleaning pilot system, burner, glass, and checking flue system.

7.2 Cleaning the glass

Instructions for cleaning the appliance glass, including removal and re-fitting procedures.

7.3 Cleaning the combustion chamber and burner

Procedure for cleaning the combustion chamber and burner, including burner assembly removal and replacement.

7.4 Cleaning the Surround

Guidance on cleaning the fireplace surround using a dry cloth or vacuum cleaner, with caution on cleaning agents.

Appendix A: Example calculation

Appendix B: Flue restrictor

Appendix C: Installation of the flue

Appendix D: Technical specifications Flatburner

Appendix E: Technical specifications Logburner

Appendix F: Dimensions Hestia Frameless

Appendix G: Dim. Hestia with Jellum surround

Appendix H: Dim. Hestia with Wirdum surround

Related product manuals