EasyManua.ls Logo

Faber Spectra Frameless - 1 Introduction

Faber Spectra Frameless
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1 < < < <
UK IRL
1 Introduction
Note: these instructions should be read carefully and retained for future reference. Please
leave these instructions with the user.
There are two models of the Spectra Frameless:
Spectra Frameless with steelplated interior
Spectra Frameless Nostalgic with bricklining
This manual covers both models. Both are developed to be installed in 3 ways:
Frameless in an existing builders opening or false chimney breast
in combination with the Jellum surround
in combination with the Wirdum surround
Specific information about the installation of both surrounds can be found in the
installation guide delivered with the Jellum and Wirdum surround. Details concerning the
installation of the appliance in relation to the surrounds are explained in this installation
guide.
Special features:
Realistic flame and glow effect because of the "Log Burner" technology
Room sealed appliance, inlet and outlet are led to the outside using a natural
draught concentric pipe system (100 mm/150 mm) (no power fan required)
Air supply and flue-gases go to outside atmosphere through wall or roof. A
maximum horizontal extension of 6 meters is possible
Remote Control standard on both models
Meets the requirements of the European Gas Appliance Directive (GAD) and carries
the CE mark

Related product manuals