EasyManua.ls Logo

FaceLake JPD-100B - User Manual

FaceLake JPD-100B
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
JPD-100B
JPD-100B Fetal Doppler
INSTRUCTION MANUAL
Manual Ver.: 2.0
Issuing Date: 2019/05/27
Question and Answer IconNeed help?

Do you have a question about the FaceLake JPD-100B and is the answer not in the manual?

FaceLake JPD-100B Specifications

General IconGeneral
Product NameFaceLake JPD-100B
CategoryMedical Equipment
SpO2 Range70% - 99%
Measurement Range (Thermometer)32°C - 42.9°C (89.6°F - 109.2°F)
Power Source2 x AAA batteries
TypePulse Oximeter, Infrared Thermometer
SpO2 Accuracy±2%
PR Accuracy±2 bpm or ±2%, whichever is greater
Accuracy (Thermometer)±0.2°C (±0.4°F)
Auto Shut-off8 seconds
Measurement Distance (Thermometer)1-5 cm

Summary

Introduction

Contact Information

Provides contact details for Lorte Technologies Inc and the authorized US representative.

Product Description

Describes the Fetal Doppler as a lightweight, portable detector for FHR and SFH.

Operating Principle

Explains how the Fetal Doppler uses ultrasonic waves to detect fetal heartbeats.

Contraindications for Use

Advises consulting a doctor for specific cases and notes general contraindications.

Safety Guidance

Safety Terms and Conditions

Defines hazard categories (DA, WA, CA) and associated risks.

Safety Alert Descriptions

Lists and explains safety alerts like fire hazard, temperature extremes, and RF susceptibility.

Symbols

Explains various symbols used in the manual, product, and accessories.

Getting Started

Unpacking and Inspecting

Guides users on verifying order accuracy and inspecting contents for damage.

Appearance and Structure

Appearance

Details the physical components of the Fetal Doppler unit with a diagram.

Display Panel

Describes the FHR display, warning symbols, and battery indicator.

Buttons

Explains the function of the switch, volume up, and volume down buttons.

Battery

Specifies the battery type (AAx2) and provides warnings for disposal.

Operation

Installation

Details how to install the probe and cautions against installing while powered on.

Operation

Guides on turning on the device, performing self-check, and getting it ready for use.

Detecting

Explains the process of applying gel, positioning the probe, and obtaining a clear FHR signal.

Replace the Batteries

Instructs to shut down the device before replacing low batteries.

Maintenance and Services

Cleaning

Recommends cleaning products like isopropyl alcohol and provides detailed cleaning instructions.

Maintenance

Emphasizes user responsibility for maintenance, transducer care, and regular inspection.

Authorized Repair Service

States that the product has no user-serviceable parts and advises contacting service for issues.

Disinfection

Outlines disinfection procedures using ethanol/alcohol and warns against steam sterilization.

Technical Specifications

Troubleshooting

EMC Information