To Next PageTo Next Page
Need help?Do you have a question about the Facom 712B and is the answer not in the manual?
General| Brand | Facom |
|---|---|
| Model | 712B |
| Category | Measuring Instruments |
| Language | English |
Overview of the clamp meter's capabilities and suitability for home users and professionals.
Essential guidelines and warnings for safe operation to prevent electric shock and injury.
Detailed instructions to avoid electric shock, personal injury, or damage to the meter during use.
Explanation of warning symbols used in the manual to alert users of potential hazards and ensure safe operation.
Detailed explanation of the clamp meter's physical features and operational display.
Description of the front panel components, controls, and connectors, including the clamp, switch, and jacks.
Detailed descriptions of key components like the current clamp, rotary switch, MAX/MIN, A-HOLD, jacks, and trigger.
Explanation of the digital display, including various symbols for auto-range, AC/DC, battery status, and measurements.
Step-by-step guide on how to operate the clamp meter for various measurements.
Instructions for using the automatic measurement mode, identifying AC/DC current, voltage, resistance, and continuity.
Information on the automatic power-off feature to conserve battery life and how to reactivate the meter.
Procedure for measuring DC voltage, including lead connection and rotary switch settings.
Procedure for measuring AC voltage, detailing lead placement and rotary switch selection.
Steps to measure AC current using the clamp, including conductor placement and range selection.
Procedure for measuring DC current with the clamp, emphasizing single conductor measurement.
Guide to measuring resistance, including capacitor discharge and tips for accurate readings.
Steps for performing a continuity test, noting the audible buzzer indication for low resistance.
Instructions for measuring frequency and duty cycle, including lead connection and rotary switch setting.
Presents technical data and operational parameters of the clamp meter.
Provides detailed accuracy, input impedance, overload protection, and frequency ranges for various measurements.
Technical details for DC voltage measurement, including range, resolution, and accuracy.
Technical details for AC voltage measurement, including range, resolution, accuracy, and frequency range.
Technical data for AC current measurements, covering range, resolution, accuracy, and input limitations.
Technical data for DC current measurements, including range, resolution, accuracy, and input limitations.
Technical data for resistance measurements, detailing ranges, resolution, and accuracy.
Details for the continuity test function, including open circuit voltage and overload protection.
Technical data for frequency measurement, including range, resolution, accuracy, and input voltage requirements.
Technical data for duty cycle measurement, specifying range, resolution, and accuracy.
Guidance on keeping the meter in good working condition, including cleaning and battery replacement.
Basic principles for maintaining the meter, covering cleaning procedures for the device and input jacks.
Step-by-step instructions for safely replacing the batteries, emphasizing low battery indication and polarity.
Guidelines for replacing test leads, emphasizing the use of approved standards and specifications for safety.
List of included accessories and important disposal information for the product.
