(vii) Preset times
The following common times are available within the preset times
menu and are selectable using the up/down scroll buttons
Press enter
Previously programmed custom time*
-- 15 mins (default)
7 mins 30 secs
3 mins 45 secs
2 mins 15 secs
*(will display 00 mins 00 secs if not set.)
The system automatically defaults to “15 mins”; if you have no
knowledge of the type of compressor lubricant being used in the
breathing-air system then accept the default time of 15 minutes by
pressing enter
If you can determine with a high degree of certainty the specific
compressor lubricant being used, then refer to the “test times” chart
provided using the column marked for the F3000.
If the required test time is one of the quoted preset times then select
using the up/down scroll buttons
Press enter
Note: for a test time not listed in the preset menu select “Add
custom time” at (vi)
Press enter
(viii) Add custom time
Using left/right scroll buttons move the cursor over the time to
be altered and set the appropriate time using the up/down scroll
buttons . When the correct time is set
- 9 -
To Next Page
Loading...
Need help?
General