fadini Elpro 7 RP - User Manual

I
PROGRAMMATORE ELETTRONICO PER NUPI 66
CON TECNOLOGIA RADIO PROGRAMMABILE
Elpro 7 RP
I
- APPRENDIMENTO DEI TEMPI CON RADIO-TRASMETTITORE
- FUNZIONE AUTOMATICO-SEMIAUTOMATICO
- FUNZIONE PASSO-PASSO CON BLOCCO INTERMEDIO
- FUNZIONE AD ANTA PEDONALE
- DIP-SWITCH DI PROGRAMMAZIONE
Via Mantova, 177/A - 37053 Cerea (VR) Italy
Ph +39 0442 330422 Fax +39 0442 331054
info@fadini.net www.fadini.net
Dis. N. 4153
NUPI 66
GB
ELECTRONIC CONTROL PANEL FOR NUPI 66
WITH PROGRAMMABLE RADIO TECHNOLOGY
F
PROGRAMMATEUR ELECTRONIQUE POUR NUPI 66
AVEC TECNOLOGIE RADIO PROGRAMMABLE
D
ELEKTRONISCHE STEUERUNG FÜR NUPI 66
MIT PROGRAMMIERBARER TECHNOLOGIE
E
PROGRAMADOR ELECTRONICO PARA NUPI 66
CON TECNOLOGIA DE RADIO PROGRAMABLE
NL
RADIOPROGRAMMEERBARE ELEKTRONISCHE
PROGRAMMEEREENHEID VOOR NUPI 66
GB
- LEARNING TIMES BY REMOTE CONTROL
- AUTOMATIC/SEMI-AUTOMATIC OPERATING MODES
- STEP BY STEP MODE INTERMIDIATE STOP
- PARTIAL PEDESTRIAN OPENING
- DIP-SWITCH SETTING
F
- AUTOAPPRENTISSANT DES TEMPS PAR TELECOMMANDE
- FONCTION AUTOMATIQUE-SEMIAUTOMATIQUE
- FONCTION PAS-PAS AVEC ARRET INTERMEDIAIRE
- FONCTION VANTAIL PIETONS
- DIP-SWITCH DE PROGRAMMATION
D
- ERLERNUNG DER ZEITEN DURCH FUNKSENDER
- AUTOMATISCHE/HALBAUTOMATISCHE FUNKTION
- SCHRITT-IMPULS-FUNKTION MIT MITTELSTOPP
- GEHTÜRFUNKTION
- DIP-SCHALTER ZUR PROGRAMMIERUNG
E
- APRENDIZAJE DE LOS TIEMPOS POR MEDIO DE RADIOTRANSMISOR
- FUNCION AUTOMATICO-SEMIAUTOMATICO
- FUNCION PASO A PASO CON BLOQUEO INTERMEDIO
- FUNCION DE HOJA PARA PASO DE PEATONES
- “DIP-SWITCH” DE PROGRAMACION
NL
- TIJDSLERING MET RADIOZENDER
- AUTOMATISCHE-HALFAUTOMATISCHE FUNCTIE
- STAP-VOOR-STAP FUNCTIE MET TUSSENTIJDSE BLOKKERING
- FUNCTIE MET VOETGANGERSPOORT
- PROGRAMMERINGSDIP-SWITCH

Summary

General Safety and Installation Warnings

Introduction

Describes the operator's intended scope of applications and manufacturer's liability.

Before Installation

Provides essential safety checks and considerations before commencing installation.

Installation Procedure

Details installation requirements, safety regulations, and testing procedures.

End-User Information

Outlines user responsibilities for operation, maintenance, and keeping instructions.

Correct Operation and Maintenance Warnings

Operation Warnings

Ensures optimal performance and safety through regular maintenance of automation and electronic equipment.

Disposal and Compliance Information

Disposal of Materials

Provides guidance on the proper disposal of packaging and electronic materials.

UE Declaration of Conformity

Confirms the product's conformity with relevant Union harmonisation legislation.

Product Functionality and Configuration

General Description

Overview of the Elpro 7 RP electronic control panel for Nupi 66 and its capabilities.

Important Installation Notes

Critical points for ensuring proper installation and safety of the control panel.

Working Logic Explained

Explains the pre-set working times and how they can be programmed.

Programming Working Times

Details the procedure for programming the required working times via P button or remote.

Learning Mode Procedure

Pre-Learning Checks

Ensures gate is closed and stops are fixed before starting the learning mode.

Step-by-Step Learning Operations

Detailed sequence of operations (1st to 11th) to program gate working times.

Technical Specifications

fadini Elpro 7 RP Specifications

General

Manufacturer	Fadini
Model	Elpro 7 RP
Type	Control Panel
Power Supply	230V AC
Operating Temperature	-20°C to +55°C
Touchscreen	No
Protection Rating	IP55
Display	LCD
Operating System	Linux
Connectivity	Ethernet, USB, RS-485