fadini Elpro 9 Plus - User Manual

pag. 1,2,3,4
- MEMORIA DEI TEMPI DI LAVORO - FUNZIONE PASSO PASSO
- APERTURA PEDONALE - COLPO D’ARIETE
- SPIA DI SEGNALAZIONE DELLO STATO DELL’AUTOMAZIONE
- LUCE DI CORTESIA O ELETTROSERRATURA TEMPORIZZATA
- FUNZIONE OROLOGIO
- MEMORY OF WORKING TIMES - STEP BY STEP MODE
- PARTIAL PEDESTRIAN OPENING - STROKE REVERSING PULSE
- GATE STATUS INDICATION BY LEDs
- COURTESY LIGHT OR TIMED ELECTRIC LOCK
- TIME CLOCK MODE
- MEMOIRE DES TEMPS DE TRAVAIL - FONCTION PAS-PAS
- OUVERTURE PIETONS - COUP DE BELIER
- VOYANT DE DIAGNOSTIC DE L’ETAT DE L’AUTOMATISME
- LUMIERE DE COURTOISIE OU ELECTROSERRURE TEMPORISEE
- FONCTION HORLOGE
- EINSTELLZEITENSPEICHERUNG - IMPULSBETRIEB
- GEHTÜRFUNKTION
- RUCKARTIGE NACHZIEHBEWEGUNG ZUR ENTBLOCKUNG DES E-SCHLOSSES
- LED-FUNKTIONSKONTROLLE
- BELEUCHTUNG ODER E-SCHLOß MIT ZEITSCHALTER
- UHRFUNKTION
- MEMORIA DE LOS TIEMPOS DE TRABAJO - FUNCIÓN PASO-PASO
- ABERTURA PEATONAL - GOLPE DE ARIETE
- INDICADOR SEÑALIZACIÓN DEL ESTADO DE AUTOMACIÓN MANUAL DE INSTRUCCIONES
- LUZ INTERIOR O ELECTROCERRADURA TEMPORIZADA
- FUNCIÓN RELOJ
- GEHEUGEN VAN DE WERKTIJDEN - STAP-VOOR-STAP FUNCTIE
- VOETGANGERSDOORGANG - EINDSTOOT
- SIGNALERINGSLAMP AUTOMATISERINGSSTATUS
- SIGNALERINGSLAMP OF GETIMED ELEKTROSLOT
- KLOKFUNCTIE
®
s.n.c .
Via Mantova, 177/A - 37053 Cerea (Verona) Italy - Tel. +39 0442 330422 r.a.
Fax +39 0442 331054 - e-mail: info@fadini.net - www.fadini.net
4192
Dis. N.
1
HANDLEIDING
VOOR DRAAIHEKKEN
PLUS
9
NL
pag. 1,17,18,19
FOLLETO DE INSTRUCCIONES
PARA VERJAS DE BATIENTE
PLUS
9
E
pág. 1,14,15,16
ANLEITUNG
FÜR DREHTORE
PLUS
9
D
Seite 1,11,12,13
NOTICES D’INSTRUCTION
POUR PORTAILS A BATTANTS
PLUS
9
F
page 1,8,9,10
INSTRUCTIONS
FOR SWINGING GATES
PLUS
9
GB
page 1,5,6,7
LIBRETTO DI ISTRUZIONI
PER CANCELLI A BATTENTE
PLUS
9
I
®

Summary

Important Safety Information and General Description

General Description

Describes the Elpro 9 plus electronic control panel for swinging gates, powered by 230V single-phase.

Important Installation Notes

Details crucial installation requirements, including sheltered placement, power supply checks, and wire section recommendations.

Control Panel Settings and Diagnostics

Dip-Switch Settings

Explains the functions of dip-switches 1 through 8 for various operational modes and features.

Trouble-shooting Guide

Provides guidance on common issues, checks for power supply, photocells, contacts, and voltage drops.

Equipment Status Indication by LEDs

Details the meaning of LEDs L1-L9 for indicating power status, photocell activity, and gate operation.

Low Voltage Electrical Connections

Photocells and Safety Edge Connections

Diagrams and descriptions for connecting photocells and safety edges to terminals 1, 2, 12, and 13.

Keyswitch and Radio Contact Connections

Illustrates connections for keyswitches (terminals 3-6) and radio receivers (terminals 7-8).

Electric Lock and Gate Status Light

Details wiring for electric locks (terminals 9-10) and 24V gate status indicator lights (terminals 8, 11).

Push Button Switch Pulin3 Connection

Shows the connection for the Pulin3 push button switch to terminals 28, 27, 26, and 3.

Electric Power Connections and Functions

Single-phase Motor Connections

Diagrams for connecting single-phase motors (M1, M2) and gate delay to terminals 16-21.

Flashing Lamp and Voltage Supply

Instructions for connecting a flashing lamp (terminals 22-23) and the 230V voltage supply (terminals 24-25).

Automatic and Semi-automatic Modes

Explains the operational modes: Automatic (auto-closing) and Semi-automatic (manual closing).

Pedestrian Partial Opening Function

Details how to partially open the gate for pedestrian access using terminals 3 and 4.

Courtesy Light and Stroke Reversing Pulse

Describes connecting a courtesy light and the function of the stroke reversing pulse for the electric lock.

Time Clock Installation and Operation

Explains how to install and operate an external time clock for automated gate opening and closing.

fadini Elpro 9 Plus Specifications

General

Manufacturer	Fadini
Type	Control Panel
Model	Elpro 9 Plus
Power Supply	230V AC
Operating Temperature	-20°C to +55°C