35
Gesture control
Touch to turn gesture control on/o.
You can use gestures to control the fan speed and lighting. When gesture control is
active, you can also control the appliance using the touch sensors.
Gesture control works correctly when you move your open hand about 3 to 10 cm
from the surface of the control panel.
Note: When controlling the fan speed, the hand motion must cover both motion
sensors (Figure 4, item 2, or the hand must be stationary within the light control
sensor (Figure 4, item 1).
If activating a certain function (such as fan speed 3) requires multiple hand ges-
tures, reposition your hand for another gesture away from the control panel to avoid
triggering the motion sensors). Hand movements must not be too fast. Preferably, a
single gesture should take about 1 second.
To turn on the fan or increase
fan speed, move your hand
from left to right several times.
With hand movement, current
fan speed sensor will light up.
To turn o the fan or reduce
fan speed, move your hand
from right to left several times
until sensor 1 lights up. Move
your hand one more time and
the fan will turn o (gesture
control will still be active)
To turn the lighting on or o,
position your hand near the
centre of the control panel
(under the sensor labelled 1)
for about 2 seconds. The
symbol will light up.
To Next Page
Loading...
