The control panel is shown in gure 10. For reference it is also shown below:
The control panel is located inside the appliance on the top wall of the refrigerator
compartment. It allows you to select the temperature setting according to the follow-
ing sequence: 2
O
C -> 4
O
C -> 5
O
C-> 6
O
C -> 8
O
C or activate rapid cooling function
(Fast Cool). You can change settings by consecutive pressing the SET button.
The Fast Cool function - enables rapid cooling of food products so they stay fresh
longer. The function will be automatically disabled after 3 hours or when the temper-
ature inside the refrigerator compartment reaches 2
O
C. The function may be disa-
bled sooner by selecting the desired temperature with the SET button.
• The temperature inside the appliance is inuenced by many factors. How you
set the temperature control dial depends on the ambient temperature, sun ex-
posure, how often you open the door and the amount of food stored. The middle
setting of the dial is most optimal in most cases.
• Do not put food into the fridge freezer before it has reached its operating temper-
ature, which takes minimum 4 hours.
• Do not change the temperature settings due to the change in the season of the
year. The ambient temperature increase will be detected by the sensor and the
compressor will be switched on automatically for a longer period of time in order
to maintain the temperature set inside the chambers.
• The slight changes in temperature are perfectly normal and may occur, for in-
stance during the storage of great quantities of fresh products in the fridge, or
when the door is open for a longer period of time. This will not aect the condition
of the stored foodstu, and the temperature will quickly return to its set value.
To Next Page
Loading...
