Fagor DDS AXD/SPD 2.75 User Manual

Cables
7.
Ref.1912
DDS
HARDWARE
· 248 ·
Cable EC-  B-D
External Stegmann sinusoidal encoder
FAGOR does not supply the direct feedback cable for connecting an
external Stegmann sinusoidal encoder with the drive
. For this connection,
you must know the pinout at the encoder end and match it with the pinout at
the drive end. With this information, the user will be able to make the
connection and make his own cable.
T. H7/15 Range of EC-B-D cables. The number indicates their length in
meters including the connectors.
EC-1B-D EC-3B-D EC-6B-D EC-9B-D
F. H7/4
Diagram of the direct feedback cable for the FAGOR absolute linear encoder.
F. H7/5
Pinout for the direct feedback cable when using a Stegmann sinusoidal
encoder as external feedback.
Cable 4x0.09+4x0.14+(4x0.09)
6
11
2
9
Pin
DATA
B
A
+5 V DC
Signal
(HD,
Sub-D,
M15)
Front view
GND
1
5
4
3
15
1/3/6/9
8
CLK
7
12GND SENSE
+5 SENSE
10
A
B
DATA
CLK
1
5
15
11
6
Brown
White
Green
Yellow
Blue
Red
Grey
Pink
Black
Purple
Red-Blue
Grey-Pink
FAGOR
EC-XB-D
sensor cable
Length in meters; including connectors
To external absolute
feedback device
to the drive - X3 -
Twisted pairs. Overall shield.
Overall shield connected to chassis
(on the sensor side and drive side).
Pin-Out of connector X3
when using Stegmann
external sinusoidal encoder
as direct feedback
Pin
+ 485
+8 V DC
Signal
(HD, Sub-D, M15)
Front view
to drive - X3 -
GND
- 485
7
4
3
2
1
14
11
8
1
5
15
11
B
A
A
B

Fagor DDS AXD/SPD 2.75 Specifications

General

Brand	Fagor
Model	DDS AXD/SPD 2.75
Category	DC Drives
Language	English