Need help?Do you have a question about the Fagor BCSD and is the answer not in the manual?
Illustrates system configuration with an SCD spindle drive connection.
Illustrates system configuration without an SCD spindle drive connection.
Details system configurations, including motors, drives, and associated cables.
Information on ferrite cores for FBS motors, including model and manufacturer.
Information on ferrite cores for FBM motors, including model and manufacturer.
Selection and mandatory use of mains filters for regulatory compliance.
Electrical diagram for a system with 3xBCSD-400V and 1xSCD-400V.
Electrical diagram for a system with 2xBCSD-200V, 1xBCSD-400V, and 1xSCD-400V.
Detailed electrical diagram of the spindle drive.
Electrical diagram for the X axis using BCSD 400V.
Electrical diagram for the X axis using BCSD 200V.
Electrical diagram for the Y axis using BCSD 400V.
Electrical diagram for the Y axis using BCSD 200V.
Electrical diagram for the Z axis using BCSD 400V.
Diagram illustrating the command signals and control logic.
Diagram showing PLC inputs and outputs for the system.
Details on connecting CNC to SCD spindle drive using BSC-CS-XX-01 cable.
Details on connecting CNC to BCSD axis drive using BSC-CA-XX-02 cable.
Details on connecting SCD spindle drive to BCSD axis drive using BSC-SA cable.
Details on connecting two BCSD axis drives using BSC-AA cable.
Information on the terminated resistor (BSC-TR) and RS485 connection cable (BSC-PC-USB).
List of available encoder and power cables for the system.
Comprehensive guide to PLC programming, covering variables, functions, and control logic.
How to access BCSD drive variables using the CNC oscilloscope function.
Details on identifying and accessing drive variables via SERCOS numbers on the CNC.
Configuration of CAN bus transmission speed (CANSPEED parameter P169).
Setting the ACFGAIN parameter for smoother drive adjustment.
Information on default parameters loaded automatically via WinBCSD.
To Next Page
General