Need help?Do you have a question about the Fagor Dro NV-300T and is the answer not in the manual?
Declaration of product compliance with safety and EMC directives.
Key safety measures and warnings for operating the unit, including handling and environment.
Guidance on selecting an optimal installation site for the DRO.
Interpretation of warning and safety symbols used in the manual and on the product.
Information on warranty period, coverage, and terms of repair.
Clauses that are not covered by the warranty and responsibilities.
Options for extended service and maintenance agreements.
Step-by-step instructions for properly packing the DRO for return.
Description of the DRO's front panel, including displays, buttons, and indicator lamps.
Details and location of various connectors on the rear panel.
Functionality of the rear power switch and the machine ground terminal.
Operating voltage, frequency, temperature, humidity, and memory backup.
Information on the ingress protection (IP) ratings of the unit's panels.
How to connect scales and encoders using SUB-D HD 15-pin connectors.
Guidelines for AC power connection, grounding, and mounting orientation.
Steps for safely turning the DRO on and off, including soft power-off.
Overview of different parameter types and how they are configured.
Procedures for entering editing mode, modifying, and directly accessing parameters.
Methods for saving, canceling, or navigating parameters during editing.
Procedure to reset all installation parameters to their original factory settings.
How digits on the axis display correspond to parameter digits.
Detailed description of the PAR00 parameter and its functions.
Setting feedback resolution for each axis.
Configuring the TTL multiplying factor for subdivisions.
Setting the factor for sinewave signals or semi-absolute feedback.
Adjusting the scaling factor for coordinate display.
Configuration of alarms for feedrate, limits, and feedback signals.
Setting compensation for axis sag.
Defining the offset from the scale's reference zero.
Binary settings for general functions like axis toggle.
Setting the limit for negative axis travel.
Setting the limit for positive axis travel.
Enabling home search for devices without reference marks.
List of error messages, their causes, and basic troubleshooting steps.
Guidelines for cleaning the DRO unit and its components.
Basic checks for power-on issues.
General| Brand | Fagor |
|---|---|
| Model | Dro NV-300T |
| Category | Digital readouts |
| Language | English |
To Next Page