Need help?Do you have a question about the Fagor VNP400 and is the answer not in the manual?
Details the enclosed and compact module structure of the FAGOR VNP400 DRO.
Provides dimensional information and guidelines for installing the DRO.
Describes the functional areas of the DRO's front panel: CRT monitor and keyboard.
Details the elements found on the rear panel of the DRO, including connectors and switches.
Explains the power connection requirements for the FAGOR DRO model VNP400.
Covers general considerations for machine interface, including grounding and decoupling.
Details the procedures for setting up the DRO, including feedback device alignment and connections.
Explains the machine's reference and datum points required for the VNP400 DRO.
Describes the initial self-test and display modes upon powering up the DRO.
Provides steps for performing a home search to establish the Machine Reference Zero.
Explains how to set absolute and incremental zero offsets for coordinate relative to part drawing.
Details how to preset coordinates for working from position value towards zero.
Explains how to apply tool compensation, including length and radius settings.
Offers guidance on troubleshooting common issues with the DRO and feedback devices.
Explains how machine parameters match the DRO to the machine, covering feedback, direction, and resolution.
Describes how to access and navigate the machine parameter tables for setting or initializing.
Details general machine parameters like language, machine type, and display units.
Explains parameters specific to each axis, covering names, display modes, and feedback signals.
Describes how to reset machine parameters to their factory default values.
Covers special functions for mill mode: part centering and drilling patterns.
Details special functions for lathe mode: cone and RPM calculations.
Explains how to perform basic arithmetic operations (ADD, SUBTRACT, MULTIPLY, DIVIDE) using the DRO.
Describes the clock function for timing applications and its reset/preset features.
Overview of storing and entering part-programs via editing, teach-in, or RS232C transfer.
Details accessing and managing part-programs, including editing, deleting, and inserting.
Explains how to generate part-programs automatically by moving axes and recording positions.
Explains the storage and execution of part-programs on the machine.
Details the step-by-step process for executing a stored part-program.
Describes how to transfer part-programs between the DRO and external devices via RS232C.
Explains the transfer of machine parameters between the DRO and external devices.
Details the use of a probe to send touch point coordinates to external devices.
Lists general specifications like memory capacity, ports, and power supply details.
Details electrical specifications for feedback inputs and the probe input.
Provides diagrams for direct connection of probes with normally open/closed contacts.
Shows diagrams for interface connections, including open collector and push-pull outputs.
A summary list of general machine parameters and their functions.
A summary of machine parameters related to axis configuration and operation.
A chart for recording values for general machine parameters.
A chart for recording values for machine parameters specific to each axis.
Details errors related to RAM, general parameters, axis parameters, and program data.
Describes errors arising from battery failure or exceeding operating temperature limits.
General| Brand | Fagor |
|---|---|
| Model | VNP400 |
| Category | Digital readouts |
| Language | English |
To Next Page