Enter the code (4321), and press to return to the initial SAT screen, with the message
“Default values updated”.
With this option it is possible to load the washing machine default parameters, except the model,
heating type and self-service parameters which are not reset.
All the new programmes which have been created in the library will be maintained, restoring the
default programmes.
0.7 Kits
Press the key on the maintenance screen to go to the activation / deactivation screen
for the different kits in the washing machine. By default, all the kits are disabled.
Press to return to the initial SAT screen.
The list of Kits is as follows:
0.7.1 Weighing system
Press the button on the extra kits screen to activate this kit to automatically weigh the load,
by measuring the inputs of the weighing shims and calculating the weight of the load before running any
programme.
This kit calculates the percentage weight inserted in the machine with respect to the nominal
weight, adapting the level setting and the dosage times according to the water saving configuration.
To Next Page
Loading...
Need help?
General
