2.7.3 Run screen (Self-service mode)
Press the key, in the HUD self-service menu, to go to the menu screen to configure the
parameters of the run screen.
2.7.3.1 Stop button, STOP
Press the key to hide the stop button so that the user cannot stop the programme. By
default this is enabled.
2.7.3.2 Remaining time
Press the key to activate / deactivate the option to display/hide the total time remaining and
the programme progress indicator on the run screen. By default it is enabled.
2.7.3.3 Machine identifier
By pressing the key, the machine identifier can be enabled/disabled, and the number to be
allocated to the identifier can be edited (between 1 and 99) using the and
keys. By default it is disabled.
With the option this option is enabled, and to go to the identifier editor, press , and the
following screen is displayed.
To Next Page
Loading...
Need help?
General
