14
USING YOUR MICROWAVE OVEN
Program your microwave oven using the
function selector knob, together with the
start-timer.
After connecting your microwave oven :
- Open the door, place the food to be
cooked inside the microwave oven
and close the door.
Make sure the door is properly closed
otherwise the oven will not operate.
- Select the power setting with the func-
tion selector knob .
- Select the time using the start-timer .
When you wish to program less than two
minutes, turn the timer beyond 2, then
come back to the desired setting.
- If using a large dish, press the turntable
off button . When off, remember
to turn the recipient or stir the contents.
After use, remember to press again to
unlock the turntable.
- Close the door, the turntable revolves, the
oven light comes on, the program begins.
- The end of the program is indicated by
a bell. The oven stops, the light goes off.
- Open the door.
- If you open the door before the end
of a program :
if the dish is ready, turn the start-timer
back to the “0” position before closing
the door. Otherwise, close the door if
you wish the program to continue.
Never operate the oven when empty.
*for certain models
To Next Page
Loading...
