PAGE 5
REACH-INS OPERATIONAL SERVICE MANUAL / Rev.JUN. 2015
REACH IN REFRIGERATORS AND FREEZERS, ELECTRICAL SPECS
Wire gauge recommended for 2% voltage drop in supply circuits **
Note:
*Breaker sizes are recommended to protect the equipment by overload; this
breaker only must be dedicated for the equipment.
**If the equipment is installed faraway of the circuit breaker, these are the
wire gauge recommend to connect the appliance; if the distance is higher that
the chart values, please contact an electrician.
***Distance in feet from the breaker or the power supply to the appliance.
To Next Page
Loading...
Need help?
General
