Need help?Do you have a question about the FAIR Henley Stoves BIO 80 and is the answer not in the manual?
Instructions for proper stove operation and maintenance.
Common questions and troubleshooting for pellet stoves.
Keeping the chimney flue clean for good functioning and safety.
Guidelines for safe clearances of chimney outlets to buildings and openings.
Details on air intake methods and requirements for healthy inner environment.
Proper methods for connecting the stove to the chimney flue, including pipe types.
Details on approved combustible material (wood pellets) and quality.
General considerations for stove placement and installation.
Details on floor support, spacing, and clearances for installation.
Requirements for safe and proper electrical hookup of the stove.
Guide to connecting an external room thermostat.
Essential steps and advice for initial and ongoing stove operation.
Explanation of buttons, displays, and LEDs on the control panel.
Step-by-step guide for igniting and starting the pellet stove.
Setting up daily operating schedules for the stove.
Setting up weekly operating schedules for the stove.
Setting up weekend operating schedules for the stove.
How to choose the display language for the stove interface.
How to enable and use the stove's stand-by mode.
How to use the remote control for heating power and temperature adjustments.
Lists and briefly explains safety alarms like energy blackout, overheating, and fan failure.
Details alarms for tank safety, pressure switch issues, and service reminders.
Importance of periodic cleaning and annual servicing for stove longevity.
Guidance on cleaning painted parts, glass, and fumes ducts.
Specific instructions for cleaning the fumes chamber, firebox, brazier, ash drawer, and fume ducts.
Specifications for the BIO 80 model, including dimensions and performance.
Specifications for the BIO 80Q model, including dimensions and performance.
Electrical schematic for the stove's control board and components.
Lists and provides solutions for various operational problems.
Addresses specific alarms (Al 8) and the 'SerV' service indicator.
Terms and conditions for the product warranty and its coverage.
Forms for recording maintenance and service work done by technical centres.
Official product fiche detailing energy efficiency class and output.
To Next Page
General