Need help?Do you have a question about the FAIR BIO80 and is the answer not in the manual?
Initial steps include warming, cooling, power disconnection, and gathering essential materials like gloves and masks.
Inspect the chimney, T-fitting, connecting tubes, gaskets, and fittings for any signs of damage or wear.
Remove the top of the stove by unscrewing the three hexagonal screws securing it.
Unscrew the heat exchanger grille and flue gas inspection plates using appropriate tools.
Use a rubber hammer for soot, a pipe cleaner for the smoke motor, and an ash aspirator for cleaning.
Remove, empty, and clean the brazier and ash drawer, including the smoke motor compartment.
Vacuum dust, clean surfaces, check component integrity, and reinstall inspection plates securely.
Perform external cleaning with an anti-static cloth and test the stove for proper functioning.
Contact technical support for information and follow recommendations for professional chimney inspection.
To Next Page
General