EasyManua.ls Logo

Fairland Pioneer PHC25L - User Manual

Default Icon
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
13/36
2015/12 - Indice de révision : F - Code : 33436
FAIRLAND PIONEER
Swimming POOL HEAT PUMPS
PHC18L-PHC25L-PHC35L-PHC50L
PHC60L-PHC60LS-PHC80LS-PHC120LS
PHC150LS HORIZONTAL
INSTALLATION AND OPERATING INSTRUCTIONS
(To be read carefully and kept for future reference)

Table of Contents

Questions and Answers

  • J
    John YoungAug 7, 2025
    What to do if my Fairland Pioneer PHC25L automatic start/stop is not working correctly?
    • A
      Andrea MartinAug 7, 2025
      If the automatic start/stop function of your Fairland Pioneer Heat Pump isn't working, check the following: Ensure the manual on/off switch is set to 'on'. Also, check if the circuit breaker has tripped or the fuse has blown. The machine might be in a delayed start phase (the 'on' LED is lit up), or the timer might be on (the ‘On’ indicator light is lit up).
  • J
    James GregoryAug 12, 2025
    Why is my Fairland Pioneer PHC25L making a clicking/popping sound?
    • B
      Benjamin CarpenterAug 12, 2025
      The clicking/popping sound in your Fairland Pioneer Heat Pump is likely due to the noise made by the 4-way valve during cycle inversions for heating/defrosting or defrosting/heating.
  • J
    James RobertsAug 17, 2025
    Why is my Fairland Pioneer PHC25L Heat Pump making a clicking/popping noise?
    • H
      Heather BrooksAug 17, 2025
      The clicking/popping noises in your Fairland Pioneer Heat Pump may be caused by the heat exchanger as it expands and contracts due to temperature variations.
  • B
    Brian SheltonAug 22, 2025
    What to do if my Fairland Pioneer Heat Pump does not start up?
    • K
      kimberlyclarkAug 22, 2025
      If your Fairland Pioneer Heat Pump doesn't start, verify that the water temperature at the heat pump outlet is a few degrees warmer than the water temperature at the inlet. Also, ensure that the air inlet and exhaust are not obstructed.
  • H
    Heidi KingAug 27, 2025
    Why is my Fairland Pioneer PHC25L making a flowing sound?
    • T
      travis70Aug 27, 2025
      The flowing sound in your Fairland Pioneer Heat Pump is likely due to the circulation of heat exchange fluid or drainage of condensates. This can occur while the heat pump is running, just after it stops, and during the first 2/3 minutes after the machine starts up.
  • D
    Dakota KimSep 1, 2025
    Why is steam escaping from my Fairland Pioneer PHC25L?
    • S
      Sophia AyalaSep 1, 2025
      The steam escaping from your Fairland Pioneer Heat Pump is because the fan stops automatically for defrosting.

Summary

Foreword

Operating Principle and Main Components

Compressor Protection

Technical Data and Specifications

Dimensions (in mm)

Physical dimensions of the heat pump models for installer reference.

Safety Advice and General Recommendations

Handling Precautions

Guidelines for safely moving and handling the heat pump unit.

Electricity Requirements

Siting and Positioning

Installation Guide

Wiring

Hydraulic Connections

Operation

Pool Water Temperature Set Point

How to view and adjust the desired pool water temperature.

Verifications Prior to Use

Essential checks before starting the heat pump operation.

Start Up Procedure

Step-by-step guide for initiating heat pump operation.

Operational Precautions

Important safety and usage guidelines during operation.

Maintenance

Troubleshooting

Fault Codes

List of error codes and their corresponding descriptions.

Guarantee Information

Fairland Pioneer PHC25L Specifications

General IconGeneral
BrandFairland Pioneer
ModelPHC25L
CategoryHeat Pump
LanguageEnglish

Related product manuals