10
Unpack the appliance and check the contents for complete-
ness (see "scope of delivery").
Sort the packaging material and recycle accordingly.
If you notice any transportation damage, please contact
your dealer immediately.
• Suction hose
Press the connecting piece at the end of the suction hose
into the air intake opening of the vacuum cleaner.
• Suction hose / Telescopic suction tube
Insert the handle of the suction hose into the telescopic
tube.
• Nozzles / Hand tube resp. Telescopic suction tube
Insert the required nozzle with a slight turn onto the handle
of the suction hose, or onto the telescopic suction tube.
• Setting the length of the suction tube
Use your thumb to press the slide element in the direction
of the arrow.
Hold the lower part of the tube in your other hand and pull
or push the suction tube to the required length.
The vacuum cleaner is now ready for use.
WARNING!
Never use a defective appliance.
Assembling
Unpacking
WARNING!
Prior to assembly, make sure that the mains plug is unplug-
ged. If the mains plug is plugged in, the appliance could ac-
cidentally be switched on, resulting in injuries.
ASSEMBLY
en
To Next Page