25
USAGE
GB
1. Plug the suction hose adapter into the suction hose
receiver and lock the adapter by turning it clockwise to the
stop point.
2. Push the handle into the upperend of the telescopic tube.
3. Push the floor nozzle/turbo brush onto the lower end of the
telescopic tube.
4. Adjust the length of the telescopic tube. To do this, pres
the telescopic tubelock forwards. Then pull the telescopic
tube by the handle to the desired length. To lock it, release
the telescopic tube lock while you pull.
5. Pull the cable till you see the yellow mark on the cable.
Operation
ATTENTION!
Be sure that all filters were attached correctly to the
appliance before you start cleaning. Filters must be
undamaged and dry. Uncompatibility can damage your
vacuum cleaner.
NOTE!
Keep the other nozzles safe and inaccessible to
children.
To Next Page
Loading...
