EasyManua.ls Logo

Fakir LUMINOSO - HEPA Filter System Maintenance; HEPA;Carbon;TiO2 Filter Maintenance

Fakir LUMINOSO
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
37
EN
WARNING!
Do not damage the wires while cleaning the unit. Call Fakir Authorized Service if any
wire is broken. Otherwise, this may cause a short circuit risk.
ATTENTION!
Appliance shall not operate if the unit is not installed properly. Make sure that it is
installed properly.
Maintenance of the HEPA Filter/Active Carbon- TIO2 Filter
Removal and Installation of the HEPA Filter/Active Carbon- TIO2 Filters
Pull the lters towards you using the threads on the sides.
Install the lters by holding from the sides to replace them.
NOTE!:
Make sure that you have placed the lters correctly. Do not install reversely. Install so
that the white side of the HEPA lter faces you.
Cleaning and Replacement of the HEPA Filter/Active Carbon- TIO2 Filters

Table of Contents