AFTER USE
GB
24
Remote Controller
Instruction
1. Insert 1xCR2025 button battery (included) into the back of
the remote control.
2. Pull the insulation film out from the backside of the remote
control before use it.
3. The remote controls all the functions as the base unit for
convenience. Follow the same instructions above to operate
the fan remotely.
4. Please take out the battery for long time no use.
NOTICE!
NOTICE !
The remote control must be
pointed towards the receiver on
the fan in order to work. Do not
mix new and old batteries.
To Next Page
Loading...
