Falcon CR-Laser User Manual

LaserGRBL（https://lasergrbl.com/usage/）
LightBurn（https://lightburnsoftware.github.io/NewDocs/）
5. What should I do if it cannot identify the COM port corresponding to the engraving
machine for WIN7 system？
Unzip the package and install the driver in the device manager manually.
6. What should I do if the software does not respond or it cannot be connected during
online-working?
Ensure that the Type-C data cable has the communication function. Restart the software and
the machine, select the COM port corresponding to the engraving machine and try to reconnect.

Falcon CR-Laser Specifications

General

Display	LCD
Power Supply	2 x AAA batteries
Accuracy	±1.0 mm
Resolution	1mm
Laser Class	Class 2