Engraving: Paper, Wood, Bamboo, Leather, Textile, Acrylic, Painted Metal, Plastic, etc.
Cutting: Paper, Wood, Bamboo, Cloth, Leather, Fabric, Acrylic, Plastic, etc.
2、Can I engrave on cambered material?
Yes, but the radian of the material should not be too large. Otherwise there will be slight
deformation.
3、Can I engrave on reflective/transparent materials such as ceramics/glass?
Yes, but you need to apply anti-reflective material on the surface of the material before
engraving to ensure the engraving effect and preventing the reflected light from damaging the laser
module.
4、Why do I have different engraving effects in the same materials with different
colors by using a same G-Code file?
Materials with different colors have different optical properties. They have a difference in
absorbing and reflecting the energy of laser. You can achieve a desired effect by adjusting the
parameters.
5、How to deal with the smoked traces on the surface of the material?
Reduce the power appropriately or buy the air assist from Creality.
6、Why is it unable to cut through the material?
1.Ensure that the machine and engraving material are parallel to the workbench;
2.Ensure that the protective lens of the laser module is clean;
3. Refer to the user manual and focus correctly;
4. Refer to the recommended parameters in TF card；
5. Gradually increase the number of passes or reduce the cutting speed appropriately；
Software
1、What software can I use for Laser Falcon？
LaserGRBL（Free）
LightBurn（Paid - 30 Days Free Trial）
2、Where can I download the software？
LaserGRBL（https://lasergrbl.com/download/）
LightBurn（https://lightburnsoftware.com/pages/trial-version-try-before-you-buy）
3、What files can I import to the software？
LaserGRBL（bmp/png/jpg/gif/svg）
LightBurn（bmp/png/jpg/jpeg/gif/tif/tiff/tga/ai/pdf/sc/dxf/hpgl/plt/rd/svg）
4. Where can I get tutorials？
The TF card comes with the machine. You can get more detailed tutorials from:
To Next Page
Loading...