5
Falcon EVO 5G Pre-Installation Guide
1) The 5G EVO Antenna has attached 2x 0.5m SMA cables and
3M tape on the base of the antenna. Waterproof the tment by
adding adhesive to the ring of the thread.
2) Docking Station:
2.1) 1800 Docking station with magnetic hold for router, type-C
power for router, 2x Ts9 cable for router, 12v power 1m cable
which requires setup for completion.
2.2) 450 Docking station with magnetic hold for the router, Micro
USB power adaptor, 2x Ts9 cables for the router, 12v power 1m
cable which requires setup for completion.
Additional Items required for Installation:
1) Ladder
2) Pencil
3) Drill
4) 6 or 8-mm drill bit (pilot hole)
5) 20mm hole saw
6) P-Clips
7) Cleaning spirit or multi-purpose cleaner to clean the roof
8) Vacuum cleaner
Scan the QR code to watch the installation guide video:
1800 Router 450 Router
To Next Page
Loading...