Falcon F2+ - Advanced FO - Pair

FALCON F  + USER MANUAL
DCI DigiGuide 10.31.2022
DIGITAL CONTROL, INC 26
Select Enter to con fi rm the
assignment one or both
bands, and continue
pairing.
ADVANCED FO - PAIR
STEP 1 OF 6
Pairing sends the frequencies you selected to the transmitter. Pair a
transmitter immediately after scanning and picking bands with one of the
Advanced methods.
STEP 2 OF 6
Con fi rm the Up and Down bands and the Power Modes on the top of the
screen.
To change the transmitter
power mode, select Select
Transmitter Power . Select
the power mode you want
to change, and then toggle
up or down to change.
STEP 3 OF 6